Volume 19, Issue 1 (Winter-Spring 2025)                   IJOP 2025, 19(1): 27-36 | Back to browse issues page

XML Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Pazokian H, Sohrabi S. Optimizing Antibacterial Activity and Wettability of 304 Stainless-steel Through Laser Pulse Overlap Control. , IJOP. 2025; 19 (1) :27-36
URL: http://ijop.ir/article-1-612-en.html
1- Photonics and Quantum Technologies Research School, Nuclear Science and Technology Research Institute, Iran
2- Department of Physics, Iran University of Science & Technology, Iran
Abstract:   (34 Views)
This study investigates the influence of overlapping Nd:YAG laser pulses on the surface properties of 304 stainless-steel and the subsequent effect on its antibacterial performance. The degree of pulse overlap was controlled by varying the beam scanning velocity. The irradiated surfaces were characterized using Field Emission Scanning Electron Microscopy (FESEM) for morphology, Energy-dispersive X-ray spectroscopy (EDS) for chemical composition, and the sessile drop method for water contact angle measurement. The antibacterial efficacy of the treated surfaces was evaluated by assessing Escherichia coli (E. coli) bacterial adhesion. Results indicate that laser pulse overlap is a critical parameter, directly impacting processing efficiency and the resultant surface modification. The sample treated with 81% pulse overlap (achieved at a scanning velocity of 400 µm/s, a fluence of 5 J/cm², a pulse repetition rate of 10 Hz, and a spot diameter of 220 µm) exhibited the highest bactericidal activity, reducing bacterial adhesion by 62%.
Full-Text [PDF 789 kb]   (16 Downloads)    
Type of Study: Research | Subject: Surface Optics, Plasmonic Structures
Received: 2026/05/30 | Revised: 2026/10/4 | Accepted: 2026/10/25

References
1. M. Bencina, T. Mavric, I. Junkar, A. Bajt, A. Krajnovic, K. Lakota, P. Zigon, S. Sodin-Semrl, V. Kralj-Iglic, and A. Iglic, “The importance of antibacterial surfaces in biomedical applications,” in Advances in Biomembranes and Lipid Self-Assembly, Vol. 28, A. Iglic, P. Losada Perez, and M. Rappolt, Eds. Elsevier, pp. 115–165, 2018. R. Kaur and S. Liu, “Antibacterial surface design – Contact kill,” Prog. Surf. Sci., Vol. 91, pp. 136–153, 2016. F.M. Zuki, R.G.J. Edyvean, H. Pourzolfaghar, and N. Kasim, “Modeling of the van der Waals forces during the adhesion of capsule-shaped bacteria to flat surfaces,” Biomimetics, Vol. 6, pp. 5(2–16), 2021. A. Terada, A. Yuasa, T. Kushimoto, S. Tsuneda, A. Katakai, and M. Tamada, “Bacterial adhesion to and viability on positively charged polymer surfaces,” Microbiology, Vol. 152, pp. 3575–3583, 2006. M. Fletcher and J. H. Pringle, “The effect of surface free energy and medium surface tension on bacterial attachment to solid surfaces,” J. Colloid Interface Sci., Vol. 104, pp. 5–14, 1985. D.L. Sanders, A.N. Kingsnorth, J. Lambie, P. Bond, R. Moate, and J.A. Steer, “An experimental study exploring the relationship between the size of bacterial inoculum and bacterial adherence to prosthetic mesh,” Surg. Endosc., Vol. 27, pp. 978–985, 2013. K. Yang, J. Shi, L. Wang, Y. Chen, C. Liang, L. Yang, and L.-N. Wang, “Bacterial anti-adhesion surface design: Surface patterning, roughness and wettability: A review,” J. Mater. Sci. Technol., Vol. 99, pp. 82–100, 2022. A. Francone, S. Merino, A. Retolaza, J. Ramiro, S.A. Alves, J.V. de Castro, N.M. Neves, A. Arana, J.M. Marimon, C.M. Sotomayor Torres, and N. Kehagias, “Impact of surface topography on the bacterial attachment to micro- and nano-patterned polymer films,” Surf. Interfaces, Vol. 27, pp. 101494(1–11), 2021. Q. Pan, Y. Cao, W. Xue, D. Zhu, W. Liu, “Picosecond laser-textured stainless steel superhydrophobic surface with an antibacterial adhesion property,” Langmuir, Vol. 35, pp. 11414–11421, 2019. X. Zhang, L. Wang, and E. Levanen, “Superhydrophobic surfaces for the reduction of bacterial adhesion,” Royal Soc. Chem. (RSC) Adv., Vol. 3, pp. 12003–12020, 2013. S. Sohrabi, H. Pazokian, B. Ghafary, and M. Mollabashi, “Super-hydrophilic nano-structured surface with antibacterial properties,” Opt. Mater. Express, Vol. 14, pp. 116–124, 2024. S. Shin, J. Seo, H. Han, S. Kang, H. Kim, and T. Lee, “Bio-inspired extreme wetting surfaces for biomedical applications,” Mater., Vol. 9, pp. 116(1–26), 2016. M.V. Shugaev, M. He, Y. Levy, A. Mazzi, A. Miotello, N.M. Bulgakova, and L.V. Zhigilei, “Laser-induced thermal processes: heat transfer, generation of stresses, melting and solidification, vaporization, and phase explosion,” in Handbook of Laser Micro- and Nano-Engineering, K. Sugioka, Ed. Cham: Springer, pp. 83–163, 2021. M. Iqbal, D.K. Dinh, Q. Abbas, M. Imran, H. Sattar, and A.U. Ahmad, “Controlled surface wettability by plasma polymer surface modification,” Surfaces, Vol. 2, pp. 349–371, 2019. A. Cunha, A.-M. Elie, L. Plawinski, A.P. Serro, A.M.B. do Rego, A. Almeida, M.C. Urdaci, M.-C. Durrieu, and R. Vilar, “Femtosecond laser surface texturing of titanium as a method to reduce the adhesion of Staphylococcus aureus and biofilm formation,” Appl. Surf. Sci., Vol. 360, pp. 485–493, 2016. N. Epperlein, F. Menzel, K. Schwibbert, R. Koter, J. Bonse, J. Sameith, J. Kruger, and J. Toepel, “Influence of femtosecond laser produced nanostructures on biofilm growth on steel,” Appl. Surf. Sci., Vol. 418, pp. 420–424, 2017. R.K. Gupta, B. Anandkumar, A.K. Choubey, R. P. George, P.S. Ganesh, B.N. Upadhyaya, J. Philip, K.S. Bindra, and R. Kaul, “Antibacterial and corrosion studies on nanosecond pulse laser textured 304 L stainless steel surfaces,” Lasers Manuf. Mater. Process., Vol. 6, pp. 332 343, 2019. R. Gupta, A. Gaddam, H. Naveena, D. Prajapati, S. Dimov, D. Bhatia, A. Mishra, Y. Sofronov, and M. Vadali, “Improving the cell adhesion and antibacterial behaviour on Ti6Al4V through micro and nano hierarchical laser surface texturing,” Surf. Interfaces, Vol. 58, pp. 105857(1–13), 2025. H. Pazokian, “Theoretical and experimental investigations of the influence of overlap between the laser beam tracks on channel profile and morphology in pulsed laser machining of polymers,” Optik, Vol. 171, pp. 431–436, 2018. N. Kumar, S. Prakash, and S. Kumar, “Studies of laser textured Ti-6Al-4V wettability for implants,” IOP Conf. Ser.: Mater. Sci. Eng., Vol. 149, pp. 012056(1–5), 2016. S. Sohrabi, H. Pazokian, B. Ghafary, M. Mollabashi, and M. Montazerolghaem, “Improving the antibacterial performance of 304 stainless steel using Nd-YAG laser irradiation,” Appl. Phys. A, Vol. 130, pp. 104(1–6), 2024. B. Jin and X. Xu, “Machine learning predictions of regional steel price indices for east China,” Ironmak. Steelmak., Vol. 52, pp. 368–381, 2025. B. Jin and X. Xu, “Contemporaneous causality among price indices of ten major steel products,” Ironmak. Steelmak., Vol. 51, pp. 515–526, 2024. B. Jin and X. Xu, “Predicting open interest in thermal coal futures using machine learning,” Miner. Econ., Vol. 38, pp. 795–809, 2025. B. Jin, X. Xu, “Forecasts of coking coal futures price indices through Gaussian process regressions,” Miner. Econ., Vol. 38, pp. 203 217, 2025. Y. Zhang and X. Xu, “Machine learning surface roughnesses in turning processes of brass metals,” Int. J. Adv. Manuf. Technol., Vol. 121, pp. 2437–2444, 2022. Y. Zhang, X. Xu, “Machine learning cutting force, surface roughness, and tool life in high-speed turning processes,” Manuf. Lett., Vol. 29, pp. 84–89, 2021. Y. Zhang and X. Xu, “Machine learning modeling of metal surface energy,” Mater. Chem. Phys., Vol. 267, pp. 124622(1–6), 2021. F.R. Marciano, D.A. Lima-Oliveira, N.S. Da-Silva, A.V. Diniz, E.J. Corat, and V.J. Trava-Airoldi, “Antibacterial activity of DLC films containing TiO₂ nanoparticles,” J. Colloid Interface Sci., Vol. 340, pp. 87–92, 2009. L. Li, L. Yang, Y. Liao, H. Yu, Z. Liang, B. Zhang, X. Lan, R. Luo, and Y. Wang, “Superhydrophilic versus normal polydopamine coating: A superior and robust platform for synergistic antibacterial and antithrombotic properties,” Chem. Eng. J., Vol. 402, pp. 126196(1–10), 2020. J. Xu, Y. Zhao, Y. Chen, Y. Chen, Z.-H. Xie, and P.R. Munroe, “A superhydrophilic, light/microwave-absorbing coating with remarkable antibacterial efficacy,” Am. Chem. Soc. (ACS) Appl. Mater. Interfaces, Vol. 14, pp. 42468–42482, 2022. P. Henke, H. Kozak, A. Artemenko, P. Kubat, J. Forstova, and J. Mosinger, “Superhydrophilic polystyrene nanofiber materials generating O₂(¹Δg): Postprocessing surface modifications toward efficient antibacterial effect,” Am. Chem. Soc. (ACS) Appl. Mater. Interfaces, Vol. 6, pp. 13007 13014, 2014. X. Wu, X. Zou, D. Wang, M. Li, B. Zhao, Y. Xia, H. Wang, and C. Liang, “Revealing the mechanical impact of biomimetic nanostructures on bacterial behavior,” Coatings, Vol. 14, pp. 860(1–18), 2024. M. Ozdal and S. Gurkok, “Recent advances in nanoparticles as antibacterial agent,” Abs., Distrib., Metabol., Excret., and Toxicity (ADMET) Drug Metabol. Pharmacokinetics (DMPK), Vol. 10, pp. 115–129, 2022.

Add your comments about this article : Your username or Email:
CAPTCHA

Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

© 2026 CC BY-NC 4.0 | International Journal of Optics and Photonics

Designed & Developed by : Yektaweb