دوره 18، شماره 1 - ( 8-1403 )
جلد 18 شماره 1 صفحات 58-51 |
برگشت به فهرست نسخه ها
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Mobashery A, Moosavi S A, Arjmand M. Generating Laser Line of Diode Laser by Means of Powell Lens: Simulation and Experimental Results. IJOP 2024; 18 (1) :51-58
URL: http://ijop.ir/article-1-568-fa.html
URL: http://ijop.ir/article-1-568-fa.html
Generating Laser Line of Diode Laser by Means of Powell Lens: Simulation and Experimental Results. . 1403; 18 (1) :51-58
چکیده: (142 مشاهده)
In the present paper, the design of the laser transmitter section of a LiDAR system is described for autonomous vehicles. The optical system is designed to produce a linear laser beam with uniform intensity. The output beam from the diode laser has a non-uniform Gaussian profile. Conventional methods for converting this profile into a linear one often results in an uneven distribution along the line. In order to address this issue, a Powell lens is used. The Powell lens is an aspheric lens that transforms the incoming parallel beam into a linear beam with a uniform profile. In this type of lens, two parameters—the radius of curvature and the conic constant—must be selected to ensure uniform intensity across the entire laser line. In the present study, the diode laser intensity distribution, collimating lenses, and Powell lens are simulated using Zemax software. The collimating lens transforms the highly divergent laser beam into a nearly parallel beam, after which the Powell lens, with a radius of curvature of r=0.9 mm and a conic constant of -1.7, produces a linear laser profile with a divergence angle of 60 degrees. Experimental results confirm the accuracy of the design and simulation process. In the experimental tests, the power drop of the laser at the start and end of the laser line was measured to be less than 15%.
نوع مطالعه: كاربردي |
موضوع مقاله:
ادوات اپتیکی و اندازهگیریها
دریافت: 1403/4/19 | ویرایش نهایی: 1404/4/24 | پذیرش: 1404/4/17 | انتشار: 1404/4/19
دریافت: 1403/4/19 | ویرایش نهایی: 1404/4/24 | پذیرش: 1404/4/17 | انتشار: 1404/4/19
| بازنشر اطلاعات | |
 |
این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است. |
